Titanium Nozzles for VARD2Go

Diameter (mm)		Hole Surface (mm2)	Typical flow rate* per nozzle (ml/min)	Article
1.10	Ti	0.95	114	D-01461
1.20	Ti	1.13	136	D-00559
1.30	Ti	1.33	159	D-01462
1.40	Ti	1.54	185	D-00519
1.50	Ti	1.77	212	D-01463
1.60	Ti	2.01	241	D-01198
1.70	Ti	2.27	272	D-01464
1.80	Ti	2.54	305	D-01465
1.90	Ti	2.84	340	D-01466
2.00	Ti	3.14	377	D-01467
2.10	Ti	3.46	416	D-01468
2.20	Ti	3.80	456	D-01469
2.30	Ti	4.15	499	D-01470
2.40	Ti	4.52	543	D-01471
2.50	Ti	4.91	589	D-01199

(restricted amount on stock)
Material Ti (Titanium 3.7035)
* Typical for low viscosity alginate (2%)

For the nozzles above 1mm the adapter for large nozzles is needed!

Please use the Info-Form to ask for the adequate encapsulation system for your specific applications.

Please note: You need Acrobat reader to display the following PDF - Files.

Working Principle